daisychain amps

jackassuk56 · 13-10-2007, 11:55 AM

can an amp be connected to the phono output on another amp with no problem.

my friend has 2 amps in his car, and there are 2 y splitters at the headunit, however one of the cables is dodgey.

What i was thinking of doing is using 1 cable to run to 1 amp then from that amp run a phono cable from the output on the first amp to a second one.

The reason im asking this is because i dont know if the phono out (next to the phono in) are amped or not.

Thanks

jackassuk56

V0NST3V3 · 13-10-2007, 05:56 PM

Im not sure about all amps, but on mine and i think on most, you have line in and out on the amp so you can run phono leads from one amp to another with no problems.

That's what ive got done on my car, no need for a splitter

13-10-2007, 11:55 AM	#1
jackassuk56 Junior Member Join Date: Jul 2007 Posts: 20 iTrader: (0) Thanks: 0 Thanked 0 Times in 0 Posts	daisychain amps can an amp be connected to the phono output on another amp with no problem. my friend has 2 amps in his car, and there are 2 y splitters at the headunit, however one of the cables is dodgey. What i was thinking of doing is using 1 cable to run to 1 amp then from that amp run a phono cable from the output on the first amp to a second one. The reason im asking this is because i dont know if the phono out (next to the phono in) are amped or not. Thanks jackassuk56

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

13-10-2007, 05:56 PM	#2
V0NST3V3 Senior Member Join Date: Feb 2007 Location: Bournemouth/Mere Drives: Honda CRX Del Sol Vti Gender: Posts: 1,513 iTrader: (0) Gallery: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Im not sure about all amps, but on mine and i think on most, you have line in and out on the amp so you can run phono leads from one amp to another with no problems. That's what ive got done on my car, no need for a splitter