All Corsa Forum banner

OBD2 Corsa

588 views 3 replies 4 participants last post by  vaux 
#1 ·
Hey lads,

I have a 2000 Corsa B 1.0 12v, but want to get a USB cable to hook it up to op-com. Anyone able to direct me to the right thing?

I just ordered one off Amazon but after researching further it looks like the car is not OBD2 like I thought and that there is no 'standard' for the older model, so I'm kinda stumped.
 
#3 ·
What version op-com did you get? I think standard Op-com is compatible with 16 pin connectors. You can also run output tests on many controllers.

PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top