[dannie88]

Hi guys, not really a mod project for the time being, more like a 'fixing' project.

I've repaired the car mechanically. Basically replaced the following items:

• 
  Wiper
  Alternator Belt
  Brake Discs
  Brake Pads
  Brake Drums
  Rear Wheel Bearings
  Rear Wheel Cylinders
  Timing Belt Kit
  Water Pump
  Steering Boltjoints
  Front Shock Absorbers
  Bump Stops
  Spark Plugs
  Horn
  Mud Shield

Next, the interior. My interior is a bit messy. I really need some help from you guys, since I haven't seen so much corsa interiors. Here's some pics of my Corsa's interior. If you notice some missing parts in any pic, please say so

GearKnob

Pedals

Glovebox & Underneath

Thanks!

 

[Coleman]

you haven't got a glovebox door and the shelf that sits underneath it is missing

 

[Demon]

radio and top of gearstick :laugh: and if you havent got a glovebox door i

take it you havent got a mfd too.

 

[P0L0-1.4]

I think we spoke about the 'lid' on the glovebox (had to get one from a post '97 corsa b), try hide them wires under the glovebox, ive removed my tray (which was origanly there) and don't see any wires, as for the gear knob, here is a site already with the lift up reverse as you will need IIRC, http://www.body-kit.co.uk/acatalog/race_sport_gear_knobs_lift_reverse.html otherwise look in the 'Rate Them' thread :thumbs_up:

P.S; What model is yours?

 

[dannie88]

1995 Vauxhall Corsa B 1.2

is that what u asked for?

Yes I know I've got the glove box door missing. But underneath it (on the heater side) it looks like it's broken. Am I right?

And I can't purchase from that website since I live in Malta (EU) and I need it to be delivered here. I don't have close relatives in the UK so I can't tell them to ship them for me

 

[dannie88]

radio and top of gearstick :laugh: and if you havent got a glovebox door i

take it you havent got a mfd too.

what do you mean by 'mfd'?

 

[Steve]

mfd - multi functional display

 

[P0L0-1.4]

tells you the time/date & temp.

as for the model mate, i ment merit,breeze,sri,gsi,sxi,LS etc (usually found on the front doors)

 

[Demon]

 

[dannie88]

Oh... that was a problem, still not fixed. I can't get to know what model I've got. I've got nothing on my doors. Is there any place where I can find this?

Yes I have an MDF, infact I've got a problem with that too (lol)!

Do I need to replace the whole display?

 

[P0L0-1.4]

as with the model, try looking on your MOT certificate, Im unsure of your MFD but all i could think of is the wires that are going to it but its best to ask one of the others as they are more technical minded :thumbs_up:

 

[Steve]

Looks like a problem with the display part of it. You could try getting hold of a replacement - should be able to get 1 fairly cheap on ebay etc.

 

[Hoggy]

looks like the main display board (i guess it'd have one) is whats commonly known as ****ed


either that or the actual display is!

 

[dannie88]

ok guys I'll talk to a technician tonight or maybe tomorrow I'll keep ya posted

 

[dannie88]

so to gather everything into one thread, here's my exterior

 

[dannie88]

another problem, yep

This is my tapestry on the back left side. As you might notice, the corner on the right is a bit higher. Do you think it's broken or fitted wrongly?

 

[Demon]

just looks like it needs to be glued back down

 

[dannie88]

it's a bit hard to push it down... so it be harder to glue it :/

 

[Demon]

no, the fabric needs to be glued to the card its probably been taken off at

some point and the popper isnt in place.

 

[dannie88]

no, the fabric needs to be glued to the card its probably been taken off at

some point and the popper isnt in place.

hmm ok. is it hard to get the thing off and fit it again?