All Corsa Forum banner

1 - 7 of 7 Posts

·
Premium Member
Joined
·
15,023 Posts
Discussion Starter · #1 ·
I was thinking about fitting some plasma dials from Auto tint design any1 have any experience of these are they any good or not and how hard are they to fit?
 

·
Registered
Joined
·
1,522 Posts
They only sell them with rev counters! :(
 

·
Premium Member
Joined
·
15,023 Posts
Discussion Starter · #3 ·
well basically nearly got them all fitted. Well they are fitting onto the clocks, that was fun, but now need to fit them to the wires that connect to the side lights so when the side lights turn on these turn on. Anyone have any idea which ones aree the side lights connectors? So far I have the cover vent out and the can see all the connectors just need to know which are which??
 

·
Registered
Joined
·
1,911 Posts
Have a look for the grey wire with the green strip i think

To check 100% see which colour wire illuminates your *** lighter, its the same colour and that will also be at the dash plug
 

·
Premium Member
Joined
·
15,023 Posts
Discussion Starter · #5 ·
Are you meaning add this in under the center console, confused me a bit there?
 

·
Premium Member
Joined
·
15,023 Posts
Discussion Starter · #7 ·
So basically one goes in the grey with the green strip? Does the red wire just go into the other 1 red wire on the switch? Jusat got round to trying again
 
1 - 7 of 7 Posts
Top