.

 

around 76nm mate.

 

Roadwheel bolts - the books says 110Nm (which I had never looked at until this very moment), I just do them as tight as feels right.

 

My torque wrench (some call it a breaker bar) only has 2 settings. QT - quite tight and FT - f*****g tight! I put the wheel bolts somewhere between the two.

 

apologies never said thanks. a search on the web came up with 100nm

dirk pitt

 

I was just gonna say if you do them about 110 Ft LBS it wont be far out, if in doubt check the wheels you haven't taken off and keep increasing the torque wrench until it clicks, then you will know its the same...as the man says a breaker bar as as good as anything, just feel it up...Fred.